Pin up furniture skirts and draperies. IMPORTANTRegarding the Dirty Water Tank: For full suction it is important that the Dirty Water Tank Lid is securely in place. Check fuse or breaker in home.3. Gently rub surface with a dampened white cloth. Recovery Nozzle not on correctly8. SmartWash+ does not use a belt to turn the brushes and instead has gears. Simply pop off the nozzle for easy access to the removable brushes. To avoid damage to wood and laminate flooring and to avoid potential slip hazard, after use (a) do not leave the product on wood and laminate surfaces and move to a hard surface and (b) place unit on an absorbent material (such as a towel) to soak up drips. Vacuum carpet and upholstery thoroughly with a Hoover vacuum before use. Is the manual of the Hoover SmartWash Plus FH52000 available in English? You will also see the float rise and shut off suction at the same time.CAUTIONDo not clean over floor electrical outlets. Continue in this mode until little water is visibly passing through the nozzle.For best results, Hoover recommends rinsing the carpet with clean water only. Test for colorfastness in a small, hidden area. 1. To avoid damage to wood and laminate flooring and to avoid potential slip hazard, after use (a) do not leave the product on wood and laminate surfaces and move to a hard surface and (b) place unit on an absorbent material (such as a towel) to soak up drips.IMPORTANTFor full suction, it is important that the Dirty Water Tank is properly secured before cleaning. If your product needs servicing within the warranty period, please contact Customer Service at 1-800-944-9200; Mon-Fri 7am-6pm EST. This warranty does not cover pick up, delivery, transportation or house calls, however, if you mail your product to a Hoover Sales and Service Center for\ warranty service, cost of shipping will be paid one way. To avoid injury or damage, keep children away from product, and do not allow children to place fingers or other objects into any openings. Refill container according to cleaning instructions.Solution wont dispense1. This warranty does not cover products purchased from a party that is not an authorized retailer, dealer, or distributor of Hoover products.if(typeof ez_ad_units!='undefined'){ez_ad_units.push([[970,90],'manuals_plus-medrectangle-1','ezslot_18',101,'0','0'])};__ez_fad_position('div-gpt-ad-manuals_plus-medrectangle-1-0');report this adOTHER IMPORTANT TERMSThis warranty is not transferable and may not be assigned. Check for secure connection to solution port on foot of Cleaner. Distributed by, Royal Appliance Mfg. Remove the Tank from the carpet cleaner base at an angle. Continue in this mode until little water is visibly passing through the nozzle. All tanks are easily removable when required. Blown fuse or tripped breaker4. At an angle, align side B on the brush to the drive gear. For best results, Hoover recommends rinsing carpet with water only. Do not expose machine to freezing temperatures. For best results, use your Carpet Cleaner + Spot Treatment + Solutions. The Dry Only mode will extract the remaining water from your carpet. Extract dirty water from your carpets without putting any additional water or formula down. To avoid personal injury or damage, and to prevent the cleaner from falling, always place cleaner at the bottom of stairs or on oor. If additional cleaning is necessary, wait until the carpet is completely dry before using the tool again. Please do not return this cleaner to the store. Dirty Water Tank full/automatic shut off engaged2. See the Cleaning Solutions section. We pride ourselves on our customer support and are here to help you. On/Off pedal not depressed1. Remove deep down embedded dirt with FlexForce PowerBrushes. Dirty Water/Recovery Tank 5. Rinse: Manual; Removable Nozzle: Yes; Motor Warranty: 5 Years; Hose Color: Black; Frequently Asked Question (FAQ) on Hoover Smartwash . Genuine Hoover parts are designed to extend the life of your machine. Troubleshooting Timestamps:No Suction(00:00) - No Suction(00:12) - Clean the Dirty Water Tank (00:24) - Clean the Nozzle Cover(00:40) - Check the Hose Port(0. Do not place cleaner on stairs or furniture, as it may result in injury or damage. When the dirty water tank becomes full, the float will rise, shutting off the air flow through the nozzle. Replace Recovery Tank and secure recovery tank latch.7. For additional assistance or information concerning this Warranty or the availability of warranty service outlets, call the Hoover Consumer Response Center, Phone 1-800-944-9200, Mon-Fri 8am-7pm EST. Order Hoover carpet cleaner parts from Repair Clinic. Avoid saturating carpets.NOTE: Empty the Dirty Water Tank when the motor sound becomes higher pitched and there is a loss in suction (see Automatic shut-off). Dont use the carpet cleaner as a traditonal vacuum cleaner. Make sure tank is securely locked in position.2. TipsTo avoid saturating carpet, do not use more than 4 wet strokes over any one area. !To reduce the risk of injury from moving parts, unplug before servicing. Ask your question here Close the Hose Port Door back into place. That means carpet washing is now as easy as vacuuming. Clean Water Tank or Solution Tank not firmly in place. . Do not place cleaner on stairs or furniture, as it may result in injury or damage. Turn off Cleaner and fill Clean Water tank & Detergent Container.2. Therefore, do not add lubricant to motor bearings or brushrolls. You will also see the float rise and shut off suction at the same time. Pretreat spots and heavy traffic areas with a Hoover Cleaning Solution*. Tools and Accessories vary per model. Place on a flat surface and unlatch the Dirty Water Tank lid to remove the top of the tank. A shut-off mechanism will close the suction system down when it is full. Remove and replace Recovery Nozzle. Product Support Library . Water will drip from the brushes and underside of the product after use and may puddle. Just seriously simple carpet washing. What is wrong with it? To replace the belt, you must slide the plastic tensioner down, wrap the belt around it, and then slide it back into place (otherwise you will think the belt doesn't fit, because it looks too big). Be sure to check Hoover Cleaning Guide on page 20 and the cleaning code on your upholstery. Do not use this extractor on hard floors. To prevent project interruption, keep Detergent on hand and store with your carpet cleaner. See How to Clean page 13.4. If both lights are on and solid than they are indicating your SmartWash has overheated and it needs to be left off to cool down for thirty minutes. Remove the Solution Tank from the back of the unit. For best results, use your Carpet Cleaner + Spot Treatment + Solutions. Do not handle plug or appliance with wet hands. Press pedal.Low suction1. This Warranty shall be governed and construed under the laws of the state of Ohio. Remove Solution Tank and repeat. Brushes will not rotate in upright position. See the Cleaning Fluid section section (pg 20) of this manual. WHAT THIS WARRANTY DOES NOT COVERThis warranty does not cover: use of the product in a commercial operation (such as maid, janitorial and equipment rental services), lter, brushroll and belt, improper maintenance of the product, damage due to misuse, acts of God, nature, vandalism or other acts beyond the control of Hoover, owners acts or omissions, use outside the country in which the product was initially purchased and resales of the product by the original owner. Copyright 2023 Manua.ls. All Rights Reserved. Triggerless Handle Design 2. SmartWash+ revolutionized the way we think about carpet cleaning. Shop for replacement parts for Hoover carpet cleaner machines at Repair Clinic. I figured out that if you DO NOT lend it to your 41 yr. old daughter to clean an apartment that housed her/spouse, 3 kids, and 4 dogs for 5+ years, itll work just fine! Unit in upright position1. 18.9 in Product Height (in.) Do not place product on cord. The clean water tank capacity is 1 gallon, while the cleaning solution capacity is 20 ounces. Maintenance12 Co. Charlotte, NC 28262. Spot Treatment may be used as a pretreatment immediately before you clean your carpets, or as an independent treatment between cleaning your carpets. STORAGEBefore storing: Empty Clean Water Tank and let air dry. Use only on carpet moistened by cleaning process. FH52000 . Therefore, do not add lubricant to motor bearings or brushrolls.CAUTIONTo reduce the risk of injury from moving parts, unplug before servicing.Tools and AccessoriesHOW TO ATTACH HOSEOpen Hose Connection Port. To avoid injury or damage, keep children away from product, and do not allow children to place fingers or other objects into any openings.Use only as described in this manual. Remove Solution Tank and repeat. Ask your question here. We notice you are visiting the United States site from Canada. Place aluminum foil or wax paper under legs of furniture too heavy to move to prevent wood nishes from staining carpet. Not firmly plugged in2. . Page 11: Using Your Smartwash Carpet Cleaner Insert hose end by inserting FIRMLY into Hose Solution Port. Do not expose machine to freezing temperatures.Do not use sharp objects to clean out hose as they can cause damage.To assist in reducing drying time, be certain the area is well ventilated when using detergents and other cleaners with this machine.To help prevent matting and resoiling, avoid contact with carpets until they are dry. Gone are the days of guesswork and hassle. Wait ten minutes and check for color removal or bleed with a white paper towel.Move furniture out of area to be cleaned. When nished cleanin, follow after Cleaning and After Using Tool instructions. Do not store extractor with solution in tanks. Forward, back. Not connected properly1. Clean Water Tank or Detergent Container is empty2. Empty Solution Tank, rinse tank with clean water.Allow brushes and underside of carpet cleaner to air dry thoroughly before storing carpet cleaner on a carpeted or wood surface. For best results, Hoover recommends rinsing carpet with water only. Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air flow.Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.Turn off all controls before unplugging.Use extra care when cleaning on stairs. 18) to help loosen and remove even the most stubborn stains. FEIT Electric SHOP Smart WiFi LED Shop Light Instruction Manual, Singtel Straits Times Activation Login Instructions, Eddyfi Technologies Cloud-based License Activation Instructions, Russell Hobbs 27160-56 Large SatisFry Air Fryer User Manual, MASON Barricade Weather Defense System User Guide, kbice FDFM1JA01 Self Dispensing Nugget Ice Machine User Guide, LUMINAR EVERYDAY 59250 2ft LED Linkable Plant Grow Light Owners Manual, Viatom Blood Pressure Monitor BP2 & BP2A User Manual, 1. 2. Make it official Register your carpet cleaner by: ITS GUARANTEED.Get cleaning confidence for up to 5 years with the Hoover limited warranty. Press the trigger and pull the tool slowly over the carpet. Order Hoover carpet cleaner parts from Repair Clinic. Filter 4. Pin up furniture skirts and draperies. For best results, pretreat stains with a Hoover spot treatment (see Hoover Cleaning Solution Guide, pg. Do not put any object into openings. This Warranty shall be governed and construed under the laws of the state of Ohio. Release trigger at end of stroke.if(typeof ez_ad_units!='undefined'){ez_ad_units.push([[250,250],'manuals_plus-square-1','ezslot_34',717,'0','0'])};__ez_fad_position('div-gpt-ad-manuals_plus-square-1-0');Lift tool, and position it against Nozzle. See Grounding Instructions.Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.Do not use without filters and tanks in place.Do not clean over floor electrical outlets.WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or reproductive harm. For best results, Hoover recommends rinsing the carpet with clean water only. HOOVER REWARDS. Remove the Tank from the carpet cleaner base at an angle.Place on a flat surface and unlatch the Dirty Water Tank lid to remove the top of the tank.Empty tank, rinse, wipe the filter clean and allow to air dry.if(typeof ez_ad_units!='undefined'){ez_ad_units.push([[468,60],'manuals_plus-narrow-sky-2','ezslot_22',709,'0','0'])};__ez_fad_position('div-gpt-ad-manuals_plus-narrow-sky-2-0');Dirty Water Tank: Your carpet cleaner is equipped with a shut off float within your dirty water tank. Ask your question here. See How to Clean & Remove Nozzle page 15.8. Fuse in cleaner blown5. See the Cleaning Solutions section.if(typeof ez_ad_units!='undefined'){ez_ad_units.push([[970,250],'manuals_plus-leader-3','ezslot_15',702,'0','0'])};__ez_fad_position('div-gpt-ad-manuals_plus-leader-3-0');Available at additional cost if not included with your model.PretreatingFor best results, pretreat stains with a Hoover spot treatment (see Hoover Cleaning Solution Guide, pg. View the manual for the Hoover SmartWash Plus FH52000 here, for free. This appliance is equipped with a cord having an equipment-grounding conductor (C) and grounding plug (A). Unplug from outlet when not in use and before cleaning or servicing. Do not place product on cord. Dirty Water Lid not on correctly4. What would you like to do? 1. To unplug, grasp the plug, not the cord. Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air flow.
Scorpio Woman Mysterious,
Lab Rats Chase Gets Hurt Fanfiction,
Articles H